Developing Raw Images; Developing One Raw Image - Pentax KC-01 Operating Manual

Developing RAW Images

174
You can convert captured RAW images into JPEG images, and save them
as new files.
Only RAW images captured with this camera can be edited. RAW images and
JPEG images captured with other cameras cannot be edited on this camera.

Developing One RAW Image

1
Select a RAW image in the single image display, and press
the four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
6
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Developing a single
image], and press the 4 button.
The parameters saved in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
4
Use the four-way controller (23)
to choose a parameter you want
to change.
You can select a different image by
turning the e-dial.
Developing a single image Developing a single image
Developing multiple images Developing multiple images
MENU
100-0001 100-0001
Image Capture Settings Image Capture Settings
MENU
OK OK
OK
OK