2. Installation and connection
Diagram showing BY75SW mounted with anchor screws
• When attaching the unit to a base plate, take the thickness of the plate cover into consideration when
choosing the appropriate screws.
Screw diameter: M4
Maximum screw length: 12 mm
Maximum tightening torque: 1.57 N/m
Hanging from ceiling (above)
Vertical
Base plate (metal)
* Attach the unit to the base plate by threading 4 screws through the
temporary screw holes on the unit's bottom surface.
Improper positions
Proper positions
Wall panel (metal)
Attach to wall surface with no supporting
surface.
22
Horizontal
Supporting surface