Operation - Miele KM 2014 Operating And Installation Instructions

Operation

The control is used to ignite the burner
and to regulate the strength of the
flame.
The burners can only be switched
on by pressing in the appropriate
control and turning it anti-clockwise,
and switched off by turning the
control clockwise. The outer flame
ring on the wok burner can only be
switched on and off by pressing the
control in and turning it the
appropriate way.
The following will cause damage to
the appliance:
- Switching the burner on without
pressing the control down,
- Switching the burner on by
turning the control clockwise,
- Switching the outer flame ring
on or off without pressing the
control down,
- Switching the burner off by
turning the control anti-
clockwise.
The manufacturer will not accept
liability for any damaging resulting
from incorrect operation.
20
Small, medium and large burners
ß The gas supply is turned off
& Strongest flame
/ Weakest flame
Wok burner
ß The gas supply is turned off
& Stongest flame:
Both the inner and the outer burners
operate at full output.
& Strong flame:
The outer burner operates at low
output, and the inner burner at full
output.
/ Weak flame
The outer burner is switched off, and
the inner burner operates at full
output.
/ Weakest flame
The outer burner is switched off, and
the inner burner operates on low
output.