Network Fax - Konica Minolta bizhub 652 User Manual

12
12.2.2

Network Fax

Description of
problem
Cannot receive
faxes
No printout pro-
duced
12-6
Check points Corrective Actions
Is paper in the If the add paper icon is lit, the machine is out of paper and re-
machine? ceived documents are stored in memory. Add paper.
For the procedure for adding paper, refer to the [User's Guide
Copy Operations].
Is paper jammed In case of a paper jam, received documents are stored in
in the machine? memory. Remove the jammed paper.
For the procedure for correcting paper jams, refer to the [Us-
er's Guide Copy Operations].
Is the machine No fax can be received if the toner is exhausted. Replace the
out of toner? toner cartridge.
For the procedure for replacing the toner cartridges, refer to
the [User's Guide Copy Operations].
Is the network ca- Check the network cable for connection and, if disconnected,
ble correctly con- connect it securely.
nected?
Is the memory full Check the remaining amount of memory or hard disk space. If
or does the hard there is insufficient memory or hard disk space, the machine
disk lack suffi- will fail to receive faxes or, if it receives faxes, will fail to print
cient available them.
space?
Is Memory RX en- If Memory RX is enabled, print the document received by fol-
abled? lowing the procedure described below.
• Press User Box and then press [System User Box].
• Press [Compulsory Memory RX User Box], and then press
[Use/File].
• If a password has been configured, enter it and then press
[OK].
• Select the document you want to print and then press
[Print].
Or set [Memory RX Setting] to [No] in the Utility menu.
Optionally, you can change the setting to disable Memory RX.
For details, refer to page 10-24.
Cannot receive faxes
bizhub 652/552
12.2