Printing Method Upon Data Reception - Konica Minolta bizhub 652 User Manual

6
Reference
- A document cannot be divided to print on multiple pages.
- The image size larger than 11 e 17 (A3) cannot be printed.
- If the paper tray of the optimal paper size runs out of paper, a message appears prompting you to sup-
ply the paper of the size. The message remains displayed until the paper is loaded in the paper tray.
6.6.4

Printing method upon data reception

The following describes the relationship between the paper size of the received document and the paper size
to be printed.
Paper size of received doc-
ument
Standard size (11 x 17 to
5-1/2 x 8-1/2 (A3 to A5))
Printed on long paper
(longer than standard
size)
Reference
- If [Duplex Print (RX)] is set to [ON], double-sided printing is possible. For details, refer to page 10-20.
6-12
[Min. Reduction for RX Print] setting
Full Size 96 to 87%
Printed on the same Printed on the same
paper size at the paper size at reduced
same scale scale
Printed on the opti-
Printed on the same
mal paper size at re-
or larger paper at the
duced scale
same scale
Printed on the same
or larger paper at the Printed on divided
same scale pages depending on
the paper size
Printing upon data reception
If a specific tray is
assigned in [Tray
Selection for RX
Print]
Printed on the paper
of specified paper
tray at reduced scale
Printed on the paper
of specified paper
tray at reduced scale
Printed on the paper
of specified paper
tray at reduced scale
bizhub 652/552
6.6