Konica Minolta bizhub 652 User Manual page 243

10.4 Administrator Settings (G3)
Item
[Print Paper Size]
[Incorrect User Box No.
Entry]
2/3 page
Item
[Tray Selection for RX
Print]
[Min. Reduction for RX
Print]
[Print Separate Fax Pag-
es]
[File After Polling TX]
bizhub 652/552
Description
Specify paper size for printing received documents. The initial setting varies
depending on the setting for [Letter/Ledger over A4/A3].
d
Reference
To enable the setting for the print paper size, set [Tray Selection
for RX Print] to [Auto].
Configure how the machine should react where an unregistered User Box
number is specified for fax RX using a User Box.
• [Print]: Prints received documents.
• [Show Error Message]:Handles the fax as a communications error.
• [Auto Create User Box]: Automatically creates a User Box with a specified
number and stores documents. If
[Password Rules] is set to ON, this item is not available.
Description
If you want to fix the paper tray used to print received faxes, select the paper
tray.
The available tray types vary depending on the options that are installed.
Specify the reduction ratio for received document to Full Size or a value be-
tween 87 and 96%.
• If the reduction ratio for printing is set to [Full Size], [Print Paper Selection]
and [Tray Selection for RX Print] are set to [Auto]. Or [Print Separate Fax
Pages] is set to [OFF].
If this item is set to ON, a document longer than the standard size is printed
on separate pages.
• [Print Separate Fax Pages] does not appear if [Duplex Print (RX)] is set to
ON.
Specify whether to delete the original after completing polling TX.
10
10-21