Starter Kill Harness (H3), 2-Pin Connector; Primary Harness (H1) Wire Connection Guide - Avital 2000 Operation Manual

Avital security systems

Table of Contents

starter kill harness (H3), 2-pin connector

______

H3/1

______

H3/2

H1/1 ORANGE (-) ground-when-armed output

This wire supplies (-) ground as long as the system is armed. This output ceases as soon as the system is dis-

armed. This wire can be used to turn on an optional sensor or to ready an optional accessory, such as a pager module.

H1/2 WHITE (+) light flash output

This wire should be connected to the (+) parking light wire. This output is protected with a 10 amp fuse. Never

increase the value of the light flash fuse. If more current is required, use an external relay.

NOTE: When connecting this wire to a (-) parking light wire, a relay is required. See the following

diagram for the relay application.

BLACK

STARTER KILL INPUT

STARTER KILL OUTPUT

Table of Contents