Primary Harness (H1), 9-Pin Connector - Avital 4103 Installation Manual

Primary harness (H1), 9-pin connector

H1/1
LIGHT GREEN/
BLACK
This wire sends a negative pulse every time the remote start is activated
or the doors are unlocked. This can be used to pulse the disarm wire
of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+)
pulse to the disarm wire as shown in the following diagram
14
FACTORY ALARM DISARM
Delay for Negative (-) Disarm Wire
© 2008 Directed Electronics. All rights reserved.