Auxiliary Harness (H3) Wire Connection Guide - Avital 2300 Installation Manual

auxiliary harness (H3) wire connection guide

______
H3/1
______
H3/2
______
H3/3
H3/1 BLUE (-) 200mA second unlock output
This output is used for progressive door unlock. A progressive unlock system unlocks the driver's door when the
unlock (disarm) button is pressed and unlocks the passenger doors if the unlock (disarm) button is pressed again
within 15 seconds after unlocking the driver's door. The BLUE wire outputs a low current (-) pulse on the second
press of the unlock button of the transmitter. This negative unlock output is used to unlock the passenger doors.
NOTE: The second unlock output feature is not available if the double pulse unlock feature is turned on.
IMPORTANT! The H2/A wire is not required for wiring the door locks. Depending on the type of door
lock system, there may be additional wires in the Door Lock Harness (H2) that are not required
used in wiring the door locks.
18
BLUE
BROWN/BLACK
VIOLET/BLACK
(-) SECOND UNLOCK
(-) 200 mA HORN HONK OUTPUT
(-) 200 mA CHANNEL 4 OUTPUT
© 2001 Directed Electronics, Inc. Vista, CA