starter interrupt harness (H3) wire connection guide
______
H3/1
______
H3/2
H3/1 and H3/2 BLACK starter interrupt wires
Use one of these wire as a starter interrupt input and the other as a starter interrupt output wire
NOTE: These two black wires are interchangeable.
plug-in LED and valet/program switch
The LED and the Valet/Program switch both plug into the control module. The LED system status indicator plugs
into the white two-pin port, while the Valet
status LED and Valet
®
/Program switch each fit into
LED System Status Indicator
© 2001 Directed Electronics, Inc. Vista, CA
BLACK
BLACK
®
/Program switch should be plugged into the blue two-pin port. The
STARTER INTERRUPT INPUT
STARTER INTERRUPT OUTPUT
/
-inch holes.
9
32
Valet
®
/Program Switch
17