7. Turn off dome light or remove dome light fuse to prevent battery drain. This device complies with Part 15 of the FCC rules. Any changes or modifications made to the system without the express approval of Avital Technologies, Inc. could void the user's authority to operate this equipment.
(-) Door Lock Output Green/White (-) Door Unlock Output Starter Dis able Re lay Wire color De scrip tion 14 Ga Yellow Starter Disable Ignition Switch Side 14 Ga Yellow Starter Disable Starter Solenoid Side Diablo /AMX 68/AT-58 Installation Manual 3/31/99...
1. Plug the impact sensor BLUE 4 pin connector into the control unit BLUE 4 pin connector. 2. Route the impact sensor to the chosen mounting location. 3. Using the supplied long tie wraps, securely fasten the impact sensor allowing access to the adjustment screw. Diablo /AMX 68/AT-58 Installation Manual 3/31/99...
NOTE: Do not connect the RED/WHITE wire to the control unit RED wire. 2. If the parking lights are negative (-) trigger, connect the RED/WHITE wire to control unit BLACK wire. 3. Connect the RED/BLACK wire to the vehicle parking light wire. Diablo /AMX 68/AT-58 Installation Manual 3/31/99...
In te rior Light Trig ger The Diablo interior light trigger wire is programmable to accept a positive (+) or negative (-) input. The module is factory preset for negative (-) door trigger. 1. Connect the alarm WHITE wire to the vehicle door trigger wire(s).
2. Connect the alarm RED/WHITE wire to the other fuse assembly (if the vehicle parking lights are (+) positive). 3. Connect the fuse assembly(s) to one of the supplied 10mm ring terminals. Con tin ued . . . Diablo /AMX 68/AT-58 Installation Manual 3/31/99...
9. Install the 5 amp fuse in the alarm module RED wire fuse assembly. 10. Install the 20 amp fuse in the alarm module RED/WHITE fuse assembly (if the vehicle parking lights are positive). Nega tive Trig ger Door Locks Diablo /AMX 68/AT-58 Installation Manual 3/31/99...
Wait 3 seconds, the siren will chirp once for 2 pulse Wait 3 seconds, the siren will chirp once for 2 pulse Two Pulse Unlock Two Pulse Unlock 1 Pulse 1 Pulse or twice for 1 pulse. or twice for 1 pulse. Diablo /AMX 68/AT-58 Installation Manual 3/31/99...
Press button #1. The siren will chirp 1 time. Remote All Channel Learn — control will operate at factory preset order. Instant Code Wait 3 seconds. The siren will chirp twice. All Remote — Deletion Controls are erased from memory. Diablo /AMX 68/AT-58 Installation Manual 3/31/99...