Installation Recommendations - Wohler AMP1A-VTR2 User Manual

Installation Recommendations

Unpacking
Unpack the AMP V Series monitor from the shipping container and
inspect all components for shipping damage. If you find any damage,
notify the shipping carrier for claims adjustments.
Compare the shipping box contents to the packing slip. Contact
Wohler's customer support personnel about any discrepancies.
(Wohler's contact information in on the copyright page ii, of this
manual).
Heat Dissipation
The ambient temperature inside the mounting enclosure should not
exceed 40° Celsius (104° Fahrenheit). Adjacent devices can be rack
mounted (or stacked) in proximity to the unit if the above temperature
is not exceeded. Allow a 1RU (1.75"/44.45mm) space above and below
the unit for air circulation.
Important:
The heat generated by the power amplifiers, power supplies, and other
components is vented by slots in the side of the unit. Therefore, as a
safety precaution, we advise you to be sure to allow proper ventilation
on both sides of the unit.
Rack Mounting
You should install the monitor into a standard 19" rack and requires a
maximum of 3RU of rack space (the 2RU unit, plus 1RU above and
below). Also, install it as close to the operator's direct viewing angle as
possible as LCD screens can appear to display anomalies outside this
viewing angle.
Cable Connections
Wohler recommends Beldon 8281 or Belden 1694A cables for analog
video signals and Beldon 9451 cables for analog audio signals.
© 2 01 0 Wo h le r Te ch n o l og ie s, I n c . A l l r i g h t s r e s e r v e d .
AMP V Series User Guide
I n s ta l la t i o n R e c o m me n d a t io n s
3