Hood Sensor - HP Compaq 6000 Pro Maintenance & Service Manual

Hood Sensor

The hood sensor is located just below the fan sink. It is secured with one screw and has one
connector.
Figure 7-42
To remove the hood sensor:
1. Prepare the computer for disassembly (see
on page
2. Remove the small rear cover (see
3. Remove the port cover (see
4. Remove the stand (see
5. Remove the drive cover (see
6. Remove the memory cover (see
7. Remove the upper rear panel (see
8. Remove the I/O panel (see
9. Remove the outer/left panel (see
10. Remove the tape (1) and screw (2) that secure the board to the computer.
Hood sensor location
38).
Port Cover on page
Stand on page
Optical Drive on page
I/O Panel on page
Preparing to Disassemble the Computer
Small Rear Cover on page
40).
41).
42).
Memory on page 47).
Upper Rear Panel on page
61).
Outer/Left Rear Panel on page
39).
49).
69).
Hood Sensor
79