Power Button Board
The power button board is located on the bottom left side of the computer. It is secured with three
screws and has two connectors.
Figure 7-36
To remove the power button board:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the small rear cover (see
3.
Remove the port cover (see
4.
Remove the stand (see
5.
Remove the drive cover (see
6.
Remove the memory cover (see
7.
Remove the upper rear panel (see
8.
Remove the I/O panel (see
9.
Remove the outer/left panel (see
10.
Remove the tape (1) and three screws (2) that secure the board to the computer.
NOTE:
Power button board location
38).
Port Cover on page
Stand on page
Optical Drive on page
I/O Panel on page
Note the location of the grounding cables for proper replacement.
Preparing to Disassemble the Computer
Small Rear Cover on page
40).
41).
42).
Memory on page
47).
Upper Rear Panel on page
61).
Outer/Left Rear Panel on page
39).
49).
69).
Power Button Board
73