Recovering The Configuration Settings - HP Compaq 6000 Pro Maintenance & Service Manual

Table 3-6 Computer Setup—Advanced (continued)
Management Devices
Management
Operations

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command
with the Computer Setup (F10) Utility before Restore is needed. (See
on page 10
NOTE: It is recommended that you save any modified computer configuration settings to a USB
flash media device or a diskette-like device (a storage device set to emulate a diskette drive) and
save the device for possible future use.
To restore the configuration, insert the USB flash media device or other storage media emulating a
diskette with the saved configuration and perform the Restore from Removable Media command
with the Computer Setup (F10) Utility. (See
Computer Setup—File table.)
The Management Devices menu will only be displayed in the Advanced menu when the BIOS
detects multiple management options.
This option is for installed NIC cards that support ASF or DASH. Use the Management Devices
menu to select if the BIOS management operations will be through the embedded solution or one
of the installed NIC cards.
Allows you to set:
● MEBx Setup Prompt (enable/disable). Enabling this feature displays the CTRL+P prompt
during POST. Disabling this feature prevents the prompt from being displayed. However,
pressing Ctrl+P
The CTRL+P function activates the MEBx Setup menu. If the Setup Password is configured,
the user will be prompted to correctly enter it before being allowed to enter the MEBx Setup.
It the password is entered incorrectly three times, the MEBx Setup will not be activated.
●
Unprovision AMT on next boot. Allows reset of AMT settings.
●
SOL Terminal Emulation Mode. Selects between VT100 and ANSI SOL terminal emulation.
SOL terminal emulation mode is only activated during remote AMT redirection operations.
The emulation options allow administrators to select which mode works best with their
console.
● SOL Local Keyboard (enable/disable). Disable or enable client keyboard during SOL
sessions. Some remote remediation may involve having the local client boot a remote image
provided by an administrator. This option determines if the BIOS will keep the local keyboard
enabled or disabled for possible local client interaction. If the local keyboard is disabled, all
keyboard input is only accepted from the remote source.
in the Computer Setup—File table.)
still accesses the utility used to configure manageability settings.
Restore from Removable Media on page 10
Recovering the Configuration Settings
Save to Removable Media
in the
21