Display Control Board - HP Compaq 6000 Pro Maintenance & Service Manual

Display Control Board

The display control board is mounted on its side on the left side of the computer. It is secured with
two screws and has one connector.
Figure 7-34
To remove the display control board:
1. Prepare the computer for disassembly (see
on page
2. Remove the small rear cover (see
3. Remove the port cover (see
4. Remove the stand (see
5. Remove the drive cover (see
6. Remove the memory cover (see
7. Remove the upper rear panel (see
8. Remove the I/O panel (see
9. Remove the outer/left panel (see
10. Remove the two screws that secure the board to the computer (1).
Display control board location
38).
Port Cover on page
Stand on page
Optical Drive on page
I/O Panel on page
Preparing to Disassemble the Computer
Small Rear Cover on page
40).
41).
42).
Memory on page 47).
Upper Rear Panel on page
61).
Outer/Left Rear Panel on page
39).
49).
69).
Display Control Board
71