Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Viking Undercounter Dishwashers
Summary of Contents for Viking Undercounter Dishwashers
- Page 1 Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com Undercounter ishwashers F20244D (010708J) #8078394...
-
Page 2: Important - Please Read And Follow
IMPORTANT - PLEASE READ AND FOLLOW TOOLS YOU WILL NEED •Before beginning - please read these instructions completely and carefully 1) Phillips No. 2 screwdriver •Do not remove permanently affixed labels, warnings, or rating plates from the dishwasher. This may void warranty. •Please observe all national and local codes. -
Page 3: Cycle Data
CYCLE DATA CUTOUT DIMENSIONS DFUD042 AND DFUD142 DESCRIPTION WATER TEMP. PRE-WASH MAIN WASH RINSE Pots/Pans 140°F or 170°F (60°C or 75°C) Heavy 130°F or 160°F (55°C or 70°C) Normal 130°F or 150°F 1 or 2 (55°C or 65°C) Light/China 105°F or 120°F 34 1/4”... -
Page 4: Basic Dimensions
WATER SUPPLY BASIC DIMENSIONS WARNING! 2 2 4 4 ” ” ( ( 6 6 1 1 . . 0 0 c c m m ) ) Plumbing connections must comply with applicable sanitary, safety and plumbing codes. Water pressure for the water supply should be minimum 18 to 176 psi. -
Page 5: Electrical Connections
DRAIN ELECTRICAL CONNECTIONS A rubber drain hose (7/8” [2.2 cm]) is provided with the dishwasher which is connected to the back of the unit to form a Electrical and grounding connections must comply with the applicable portions of local electrical codes. WARNING! high loop. -
Page 6: Connecting The Electrical Cables
Moving the Machine Into Place ADJUSTING THE LEVELING LEGS NOTE: Position the machine in front of the cabinet It may be necessary to install a wood trim above the dishwasher if the standard toe space is maintained or opening. Make the preliminary height adjustment you can raise the dishwasher to fit using the leveling legs. -
Page 7: Fastening The Dishwasher To The Cabinet
FASTENING THE DISHWASHER TO THE CABINET INSTALLING THE DESIGNER SERIES OR PROFESSIONAL SERIES DOOR PANEL (Purchased separately) WARNING! The unit comes with everything needed to make installing the door panel easy. The dishwasher door will not stay open by itself until the door panel is installed. Be aware of this when fastening the dishwasher to the cabinet. -
Page 8: Adjusting The Door Springs
Before fitting the custom door front, the dishwasher must be installed underneath the cabinet. After making required measurements, it may be necessary to pull the unit out again to install the door front. 1. Fit handle (A) onto the panel according to the manufacturer’s instructions (NOTE: A handle should be used rather than a knob, because a knob does not provide enough grip.) 2.