Before Using The Network Camera - Digitus ADVANCED NETWORK SURVEILLANCE CAMERA User Manual

2. BEFORE USING THE NETWORK CAMERA

Before using the network camera, make sure:
1) You have installed the supplied CMS software, "Video Viewer".
2) You have configured the network settings, and the network connection is fine.
If not, please refer to your the installation guide.
This network camera can be accessed via our supplied CMS software "Video Viewer", or the web
browser "Microsoft Internet Explorer" or "Mozilla Firefox" depending on different using situations.
To check or configure up to 16 surveillance devices simultaneously with the record function, please use

"Video Viewer".
For details about using Video Viewer, please refer to "3. ACCESSING THE CAMERA VIA VIDEO
VIEWER" at page 4, and "4. SYSTEM CONFIGURATION" at page 12.
 To check or configure this network camera only, it's recommended to use the web browser "Microsoft
Internet Explorer" or "Mozilla Firefox".
For details about using the web browser, please refer to "5. ACCESSING THE CAMERA VIA WEB
BROWSER
" at page 21.
3