Notification Setting
In this section, you can select to enable E-mail and/or FTP notification when an alarm or a
motion happened.
Item
Method
Video Type
Total
4.2 Network
You can set the network configuration of the network camera depending on your network type. For
details, please refer to your installation guide.
4.2.1 QoS
QoS, Quality of Service, is the ability to control the data flow for real-time streaming. This
function is important if your network bandwidth is insufficient and you have other devices to
share the network bandwidth.
Check "QoS Enable", and set the max. upload rate from 256 to 10240 kbps.
4.2.2 DDNS
Select "On" when the selected network type in "Network" is "PPPOE" or "DHCP". For details,
please refer to the installation guide.
Description
‧Email
When this option is checked, the network camera will upload the captured video clip to the assigned
E-mail address(s) once motion or alarm recording happened.
‧FTP
When this option is checked, the network camera will upload the captured video clip to the specified
FTP site once motion or alarm recording happened.
Select the file type of the notification files: H264 (video) / MPEG4 (video) / JPEG (image).
Set the record time of the notification video clip (1 ~ 5 seconds).
16
Need help?
Do you have a question about the ADVANCED NETWORK SURVEILLANCE CAMERA and is the answer not in the manual?