Russell Hobbs Espresso Maker Instructions And Guarantee page 6

espresso
36 If you're making one cup of coffee, put a cup under filter holder, so it's below both
nozzles. If you're making two cups, put each cup under a nozzle.
37 When the ready light stops flashing (stays on), press the 1 or 2 button, to select how
many cups of coffee you want (the 1 button = 1 cup, the 2 button = 2 cups).
38 The light round the button will come on, and hot coffee will flow from the filter
holder. Wait till the coffee stops dripping from the filter holder, before removing
your cup(s).
39 If you're making cappuccino, go to "cappuccino", next page.
more?
40 Check the water tank and top up as necessary. The valve will prevent water spilling
from the bottom of the tank
41 Check the drip tray. If the level indicator pops through the hole in the cover, it needs
emptying.
caution
metal parts will be very hot, some plastic parts will be almost as hot, so take
care, and follow the instructions.
42 Squeeze the pressure release on the filter
holder, to release any pressure/water
trapped between the brewing head and the
filter holder.
43 The lid will be fairly cool, so put a hand on it,
to steady the machine.
44 Grip the filter holder handle with the other
hand, and turn it to your left, till it reaches
the arrow on the left, then lower it from the
brewing head.
45 Flip the clip on the filter holder handle
forward, and keep a finger on it while you
tip out the used coffee grounds. This'll
prevent it joining the coffee grounds in the
bin.
46 If you forget, and throw the filter out with the coffee, ring customer service
department. They'll be delighted to sell you a replacement.
47 Flip the clip back, to release the filter. If the filter is stuck in the filter holder, put a
coin or the tip of an old spoon into the gap and give it a turn, to release it.
48 Rinse the filter, spacer, and filter holder under the cold tap, and dry them.
49 Go back to "coffee fill", and fill the filter with coffee.
finished?
50 Press the 2 button, the 2 light will go out, then unplug the machine.
51 Leave the machine to cool down, then clean. See "care and maintenance".
�����
����
�����
������
�����
������
��������
������
�������
6