Russell Hobbs 13401 Instructions Manual
  1. Manuals
  2. Brands
  3. Russell Hobbs Manuals
  4. Coffee Maker
  5. 13401
  6. Instructions manual
Russell Hobbs 13401 Instructions Manual

Russell Hobbs 13401 Instructions Manual

Coffee maker
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading

Related Manuals for Russell Hobbs 13401

Summary of Contents for Russell Hobbs 13401

  • Page 1 instructions...

  • Page 3: Important Safeguards

    Read the instructions and keep them safe. If you pass the appliance on, pass on the instructions too. Remove all packaging, but keep it till you know the appliance works. important safeguards Follow basic safety precautions, including: 1 This appliance must only be used by a responsible adult. 2 Take care –...

  • Page 4: Water Fill

    water fill 10 Lift the reservoir handle, and use it to lift the reservoir off the rear of the appliance. 11 Fill with water – don’t fill past the MAX mark. 12 Lower the reservoir on to the appliance. 13 Press the reservoir gently down to make sure the water valve is properly fitted, to prevent leaks.
  • Page 5 more? 36 Put a hand on the side of the appliance to steady it. 37 Grip the filter holder handle with the other hand, and turn the handle to your left, till it reaches the arrow d on the left, then lower it from the brewing head. 38 Tip the coffee grounds out of the filter.

  • Page 6: Warming Milk

    clean the frother 65 You must clean the frother, steam pipe, and nozzle immediately after use, to prevent milk deposits going hard, and blocking the steam pipe and nozzle. It’s also unhygienic. 66 Hold a cup under the frother, so that the end of the frother is well inside the cup. 67 Press and release the S button.
  • Page 7 20 Don’t wash any part of the appliance in a dishwasher. 21 The extreme environment inside the dishwasher can affect the surface finishes. 22 Don’t put the appliance in water or any other liquid. 23 Don’t use harsh or abrasive cleaning agents or solvents. descaling 24 Scale build-up will cause the element to overheat, reducing its working life.

  • Page 8: Spare Parts

    connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

Table of Contents