Russell Hobbs Espresso Maker Instructions And Guarantee page 5

23 Wait till the ready light stops flashing (stays on), then slowly turn the steam control
S fully anticlockwise, pause for a count of two, then slowly turn it fully clockwise.
24 Wait till the ready light stops flashing, then press the 2 button. The light round the 2
button will come on, and hot water will flow from the brewing head, then stop.
The machine has now been primed, and is ready to make coffee. Pour away the water
in the containers.
coffee fill
25 Decide how much coffee you want – for 1 cup (about 50ml/1.5-2 floz), use the small
filter, for 2 cups (about 100ml/3-4 floz), use the big filter.
26 Use one scoop of coffee with the small filter.
27 Use two scoops of coffee with the big filter.
28 Put the coffee into the filter, then tamp the coffee down with the tamper. It needs
to be firmly tamped down, but not compacted.
for one cup of coffee:
a) Put the spacer into the filter holder.
b) Put the small filter into filter holder, so the keys
on the small filter fit into the slots in the filter
holder.
c) Clear any coffee grounds from the rim, otherwise
it won't seat properly in the brewing head.
for two cups of coffee:
a) Put the big filter into the filter holder, so the
keys on the big filter fit into the slots in the filter
holder.
b) Clear any coffee grounds from the rim,
otherwise it won't seat properly in the brewing head.
loading
29 The clip on the filter holder handle is there to prevent the filter coming out when
you empty it. Flip it back, out of the way, then lift the filter holder up to the brewing
head.
30 Align the arrow on the filter holder handle with the left arrow on the front of the
machine. The lugs on top of the filter holder should engage in the lugs round the
brewing head.
31 Turn the handle to the right arrow on the front of the machine, to lock the filter
holder in place. The marks may not match exactly – turn the handle as far right as
it'll go comfortably, without straining.
switch on
32 Turn the steam control S clockwise to close it.
33 Plug the machine in.
34 Press the 2 button. The 2 light will come on and the ready light will flash.
35 The ready light will stay on when the water has reached brewing temperature. The
thermostat will then cycle on and off to maintain the temperature.
nb Buttons S, 1 and 2, only work after the machine reaches brewing temperature.
�������
�����
�����
������
����
5
��������
���
����
������
�����
������
������