Printing The Date And A Stamp On; Copies (Stamp) - Sharp MX-5500N Manual

PRINTING THE DATE AND A STAMP ON

COPIES (Stamp)

Use this function to print the date, a stamp, the page number, and text on copies.
Six printing positions are available: top left, top centre, top right, bottom left, bottom centre, and bottom right.
The printing positions are separated into areas that are used for the date, page number and text (A below), and areas
that are used for a stamp (B below).
Top left
A
Bottom left
Bottom centre
• If the selected stamp content of one position overlaps the stamp content of another position, priority will be given in the
following order: right side, left side, centre. Content that is hidden due to overlapping will not be printed.
• Text will be printed at the preset size regardless of the copy ratio or paper size setting.
• Text will be printed at the preset exposure regardless of the exposure setting.
• Depending on the size of the paper, some printed content may be cut off or shifted out of position.
When used in combination with other special modes
When Stamp is used in combination with the following special modes, the special modes are reflected in the stamp
content.
Special Modes
Margin Shift
Dual Page Copy
Pamphlet Copy
Book Copy
Multi Shot
Card Shot
Covers/Inserts
When used in combination with "Erase", "Job Build", or "Mirror Image", the stamp is printed in the set position as usual.
Top centre
Top right
Bottom right
Together with the image, the stamp content is shifted the amount of the margin width.
The stamp is printed on each copy sheet.
The stamp is printed on each page of the resulting pamphlet or book.
The stamp is printed on each copy sheet.
Use the stamp settings to select whether or not the item is printed on inserted covers and
inserts.
Stamp
Date
Stamp
B
Page
Numbering
Text
86
Print area
A
B
A
A
Printing
Maximum number
of positions
1 position only
6 positions
1 position only
6 positions