Sharp MX-5500N Manual page 125

4
Up to 999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key (
5
To cancel copying...
Press the [STOP] key (
Press [End] to continue.
To make a proof copy again, press
[Start].
6
To cancel copying...
Press the [STOP] key (
7
Special Modes
2-Sided Copy
Plain
A4
) and then enter the correct number.
or
).
Change End
).
Set the number of copies (number of
sets) with the numeric keys.
If you will copy multiple originals using the document glass,
switch to sort mode after this step.
☞
Sort mode (page 38)
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key (
One set of copies is printed.
If you are using the document glass to copy multiple originals,
change originals and press the [START] key. Repeat until all
pages have been scanned and then touch the [Read-End] key.
One set of copies will be printed. (For the second original and
following originals, use the same [START] key as you did for
the first original.
Check the printed set of copies. If the
copies are acceptable, touch the [End]
key. If you need to change the settings,
touch the [Change] key.
When the [End] key is touched, the remaining sets are printed.
If you touched the [Change] key, go to the next step.
125
).