Sharp MX-5500N Manual page 52

Special Modes
Margin Shift
3
Pamphlet Copy
Covers/Inserts
Book Copy
4
To cancel scanning of the original and copying...
Press the [STOP] key (
• When using dual page copy, the original must be placed on the document glass.
• To erase shadows caused by the binding of a book or other bound document, use the erase function.
However, note that [Centre Erase] and [Edge + Centre Erase] cannot be used.
To cancel dual page copy...
Touch the [Dual Page Copy] key in the screen of step 3 so that it is not highlighted.
(2) (3)
Dual Page
Erase
Copy
Tandem
Job
Build Copy
Transparency
Multi Shot
Inserts
Tab Copy Card Shot
or
).
Select Dual Page Copy.
(1) Touch the [Special Modes] key.
OK
☞
SPECIAL MODES
(2) Touch the [Dual Page Copy] key so that it is
1
highlighted.
2
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key (
Copying will begin.
If you have selected sort mode, change originals and press the
[START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key. (For the second original and
following originals, use the same [START] key as you did for
the first original.)
52
(page 44)
).