Outputting Ch-3/Ch-4 Channel Sound - JVC GY-DV300 Instruction Manual

Outputting CH-3/CH-4 Channel Sound

PLAYBACK
4 channels are available when the DV format is recorded with 12-bit, 32 kHz audio sampling. The GY-
DV300 records audio on the CH-1 and CH-2 channels. When the GY -DV300 is used for playback of
tapes with sound recorded on the CH-3 and CH-4 channels on another unit, the PB AUDIO SELECT item
on the VTR menu screen must be set.
MODE switch
MENU button
TOP MENU screen
MEN U
V T R S E T . .
S Y S T EM S E T . .
D I S PL AY S E T . .
C L OC K / T C . .
ME NU A L L R E SE T C
E X I T
VTR menu screen
V TR
PB A U D I O S E L E C T CH / 2
REM F F / REW MODE F
P AG E B A CK
DRU M HOUR 0
Setting
CAM-A
Setting
Confirm that the MODE switch is set to "VTR".
1.
Press the MENU button to display the TOP MENU screen.
2.
Using the SELECT dial, select the VTR SET item, and then
ANC E L
press the SELECT dial.
● The VTR menu screen is displayed.
3.
Rotate the SELECT dial to align the cursor ( f) with the PB.
AUDIO SELECT item, and then press the SELECT dial.
● The setting area starts blinking.
4.
Rotate the SELECT dial to make the settings.
CH1/CH2 : To reproduce the sound recorded during shooting.
1
F / REW
MIX
0 2 0 0
0
CH3/CH4 : To reproduce the sound after-recorded on CH-3 and
5.
When the SELECT dial is pressed, the set value is confirmed.
6.
To return to the normal screen, use either of the following
methods.
● Press the MENU button
or
● Return to the TOP MENU screen and then select the EXIT
item before pressing the SELECT dial.
MODE
CAM-B
VTR
GAIN
SHUTTER
MENU
: To simultaneously reproduce the sound recorded
during shooting and the sound after-recorded on
CH-3 and CH-4.
CH-4.
SELECT dial
83