Clock/Tc Menu Screen; Vtr Menu Screen - JVC GY-DV300 Instruction Manual

CLOCK/TC Menu Screen

Item
TC PRESET
CLOCK
ADJUST
DATE STYLE
● MM/DD/YY
● 24 HOUR
TIME STYLE
● ON
SEC DISPLAY
PAGE BACK

VTR Menu Screen

The VTR menu screen can only be set in the VTR playback mode.
Item
● CH1/2
PB AUDIO
SELECT
● FF/REW
REM FF/REW
MODE
PAGE BACK
DRUM HOUR
Set Value
The screen for setting the time code appears when the SELECT
dial is pressed. (
The screen for setting the date and time appears when the
SELECT dial is pressed. (
YY/MM/DD For selecting the style of the date display.
YY/MM/DD: Year/Month/Date display style.
DD/MM/YY MM/DD/YY: Month/Date/Year display style.
DD/MM/YY: Date/Month/Year display style.
For selecting the style of the time display.
12 HOUR 24 HOUR : Displays the time using the 24-hour system.
12 HOUR : Displays the time using the 12-hour system.
For selecting whether to include the seconds in the time display .
OFF ON : Seconds are displayed.
OFF : Seconds are not displayed.
The TOP MENU returns when the SELECT dial is pressed.
Set Value
Used to select which channels to reproduce when playing back a
MIX tape with sound recorded on 4 channels.
CH3/4 CH1/2 : To reproduce the sound recorded on CH-1 and CH-2.
MIX
CH3/4 : To reproduce the sound of the CH-3 and CH-4 channels.
Memo:
The GY-DV300 does not allow after-recording on the CH-3 and
CH-4 channels.
This selects the operation when the FF or REW command is
SEARCH received when the GY-DV300 is controlled by the Non-liner
editing controller
FF/REW : Fast forward or rewind operation. Normally , use this
SEARCH : FWD search or REV search operation. Use this
The TOP MENU (VTR) returns when the SELECT dial is pressed.
Indicates the accumulated hours of drum running time.
The cursor (f) cannot be aligned with this item.
Contents
See page 45.)
Contents
The GY-DV300 records audio on the CH-1 and CH-2
channels during shooting.
: To simultaneously reproduce the sound of all four channels.
setting.
setting if Cue up operation is not performed correctly
when this item is set to FF/REW.
See page 41.)
99