Subscribe to Our Youtube Channel
Related Manuals for Aviosys 9077SPD-I
Summary of Contents for Aviosys 9077SPD-I
-
Page 1: User Manual
IP Kamera 9077SPD-I/O User Manual Release Date: 7/28/2011 Manual Version: V1.2.1.9 - 1- Ref#9077033111... - Page 2 IMPORTANT NOTICE 1. IP Kamera 9077SPD-I/O was designed for indoor use only. It is the responsibility of the user for any possible damages caused by outdoor use, especially in the rain. 2. Please use the power adapter provided by the dealer, the manufacturer responsibility for the possible damage from using power adapters not.
-
Page 3: Table Of Contents
Table of Content 1.) WELCOME .........................6 ..........................6 NTRODUCTION ....................7 INIMUM YSTEM EQUIREMENTS 2.) PRODUCT OVERVIEW ......................7 ..........................7 EATURES ..........................7 PECIFICATION ........................8 ACKAGE ONTENTS 3.) HARDWARE DESCRIPTION ....................8 ........................8 ABLE NTERFACE ........................9 EVICE UTLOOK 4.) SETTING UP THE DEVICE ....................10 ........................ - Page 4 6.) WEB INTERFACE ......................23 9077SPD-I/O .................... 23 ONNECTING TO THE ......................25 ONTROL ONSOLE ..........................26 IDEO ..........................26 YPE AND .......................... 27 OTION ETECTION ..........................27 CTIVE ECORD ............................27 NAPSHOT ............................28 ECORD ..........................29 ANORAMIC EPTZ ............................ 30...
- Page 5 6 5 B C : ........................71 HANGE UBNET : ........................... 72 HANGE ATEWAY DNS: ..........................72 HANGE MJPEG S ........................... 72 TREAMING ....................... 72 ONTROLS ............................. 72 ASIC PEED ............................72 ............................ 73 ............................73 ............................. 73 IGHT ..........................73 OMMAND 8.) USING RTSP WITH VLC .....................
-
Page 6: Welcome
Innovative features like My Web and EZ Blog, customization of this IP Kamera has never been easier. Aviosys definitely welcomes you to try out IP Kamera 9077SPD. This device will bring ease of mind as well as convenience for a great price. -
Page 7: Minimum System Requirements
Minimum System Requirements CPU Minimum Requirements • Intel(R), Pentium(R), DUAL Core (D),CPU 3.0GHz or equivalent • Operating Systems: WINDOWS Operating Systems (IE5.0+SPI) • 512 MB system memory or above • Video Card: 3D hardware accelerator card required – 100% DirectX 9.0c compatible •... -
Page 8: Package Contents
Package Contents 9077SPD-I/O Unit x 1 9077SPD-I/O Installation CD AC Adaptor x 1 9077SPD-I/O Ethernet Cable x 1 9077SPD-I/O Installation tool kit x 1 3.) Hardware description Cable Interface Cable Device Reset: Reset to Manufacturer Default: Hold Reset button for 7 -10 Seconds and the device... -
Page 9: Device Outlook
Device Outlook Cable Interface Note: To prevent any damages to this device, do not use any cable not certified by the manufacture. RJ45 Female: Connect internet connection to this part of the cable AC Adapter Cable: Connect the power adapter to this part. If PoE is being used then no power will be required on this cable. -
Page 10: Setting Up The Device
AC Adaptor x 1 9077SPD-I/O Ethernet Cable x 1 9077SPD-I/O Installation tool kit x 1 3.) Use the tool that was provided and slowly loosen the screws so that the base of the 9077SPD can be attached to the bottom of the device. You can unscrew the ring connector if you feel it is easier to loosen the screws. -
Page 11: Setting Up The Device
6.) Connect the base of the 9077SPD to the body, make sure the screw is fitted into the socket and tighten the screws. Setting up the device Now that the device is ready, it is time to connect the 9077SPD to your network. Follow the following steps: 1.) Connect the power to the 9077SPD. -
Page 12: Software Setup
3.) Wait for about 1 minute for the operating system to load then open IP Edit and rescan for devices. Software Setup The software for the device is located on the Media Link-IP Family CD that came with the device. IP Kamera Pack is located on the main page of the CD. -
Page 13: Installing Vlc Codec
Installing VLC Codec The files that are recorded by the 9077SPD-I/O requires this codec so that you are able to view the view. Download the latest version of the VLC codec and install it into your computer. You can find the latest version of the codec from here h ttp://www.videolan.org/... -
Page 14: Ip Edit
IP Edit IP Edit is a tool designed to search for Aviosys products that are on the network. With this tool you can edit some specified fields which allow the device to be found and accessed. IP Service allows users to find their device on the internet without having to remember long IP Addresses. -
Page 15: Custom Setup (Manual Setup)
Custom Setup (Manual Setup) When no DHCP is found on the device, the 9077SPD-I/O will be given a static IP Address. Default IP: 192.168.1.168 (When 9077SPD-I/O is connected to PC directly) Default Login: admin Default Password: 12345678 1.) Highlight the 9077SPD-I/O device in the local devices section of IP Edit. On the right side of IP Edit all network information of the device will be displayed. -
Page 16: Focusing The Lens Of Ip Kamera
4.) Then hit the rescan button on IP Edit to confirm the changes have been made. Focusing the Lens of IP Kamera Note: Make sure that you have setup the device so you can see it on the monitor first. Once you have done that you can easily focus the lens. -
Page 17: Ip Service
IP Address. Instead you only need to remember the name of the device that the you have selected. Then the user can connect to IP Service, type in the device name, and connect directly to the device. Note: The IP Kamera 9077SPD-I/O requires you to select Server 2 on IP Service - 17- Ref#9077033111... -
Page 18: Www Myipedit Com
Aviosys users to easily find there device on the internet . Simply by typing in the name of your device you will not have to remember long IP addresses to get to your device. - Page 19 Searching with IP Service: To use IP Service: 1.) Click on the image and you will be taken to the IP Service webpage. 2.) Depending on which server you selected in the IP Service settings, you will need to select from server 1 or server 2.
- Page 20 Searching with IP Service (Google Cloud): To use IP Service (Cloud): 1.) Click on the image and you will be taken to the IP Service webpage. 2.) Type in the name that you have selected for your device and hit the submit button. Note: You can name your device in the network settings of your device under IP Service.
-
Page 21: Accessing The Device On The Internet (Port Forwarding)
On the router that is being used port forwarded (port triggered) IP Address 192.168.1.882 and port 9077SPD-I/O. For this section you may be required to refer the user manual for the router due to the fact that each router has a different way of setting up the device. -
Page 22: Static Ip Setup
Static IP Address provided by the ISP. In this case, the 9077SPD-I/O is being connected to the internet through a hub, which is different from a router. The hub does not provide DHCP, and therefore would require that this setup have a static IP Address that is provided by the ISP. -
Page 23: Web Interface
6.) Web Interface Connecting to the 9077SPD-I/O Once the 9077SPD-I/O has been setup correctly, connect to the login page. An Internet Explorer browser screen pop up with the login screen. Default IP: 192.168.1.168 (When 9077SPD-I/O is connected to PC directly) - Page 24 4.) Once active X controls have been installed the video feed will show on the screen Note: If no active x controls are showing up, please go to internet explorer and enable activeX controls. - 24- Ref#9077033111...
-
Page 25: The Control Console
The IP Kamera 9077SPD-I/O Control Console starts in the Section of the webpage. In this section navigate to the other options and settings of the 9077SPD-I/O Live Video: The Live Video section allows the user to view the camera, change resolution views, Image: The Image section allows the user to adjust the image settings, including recording / viewing codec, frame rate, image tuning, brightness, contrast, saturation, and etc. -
Page 26: Live Video
PC. Live Video The Live video section of the IP Kamera 9077SPD-I/O is where you will live view the video of the device. From here you can change resolution, record onto current pc, take a snapshot, zoom, and detect motion detection. -
Page 27: Motion Detection
Active Record Activated - When the active recording function is activated it will light up in red. Snapshot Snapshot: The snapshot function, creates a easy way take pictures of the current view in the IP Kamera 9077SPD-I/OIR. To setup the snapshot destination folder: 1.) Click on the Application link on the bottom menu 2.) Then select Snapshot path... -
Page 28: Record
2.) In explorer go to the selected path and the files will be created there. Record Record: The record button on the 9077SPD-I/O when pressed will record the live video feed and save the video into the computer viewing. To record follow the following steps: 1.) Select the recording path that you would like to store the file under in the... -
Page 29: Panoramic Mode
3.) Once the folder has been selected the device will start to record. To stop recording click on the red icon and it will return to the original state. Note: Remember you need VLC codec to play the video files that are recorded Panoramic Mode The panoramic mode allows the user to take 360 degree pictures of the 9077SPD current surroundings. -
Page 30: Mouse Eptz
3.) Once each picture has been taken you will see the pictures on the bottom show up with each 4.) If you click on one of the slides on the 360 panel view, the live view screen will move to that position on the device. 5.) To save the pictures on the slide panel simply right click on the image that you would like to save and selected the save as button. - Page 31 To Zoom Out: To Zoom out of the picture move the mouse cursor over the picture and click and hold the right mouse. Quick Zoom In: Quick zoom in is used to quickly zoom into the maximum zoom of the picture. To use this function on the picture double click the left mouse.
-
Page 32: Pt Controls
PT Controls The PT icon will activate the Pan Tilt function on the 9077SPD. This will activate the remote control so that your device can be controlled from here there are many functionality which can be used to meet your needs. - 32- Ref#9077033111... - Page 33 Control Interface The control interface is the controller for the PT of the 9077SPD. Below we have listed out the different functionality in more details. Basic Control External Remote Window - The external remote window button will create a remote in another browser window so you can view your device while using the pan tilt.
- Page 34 X-Axis Patrol The X-axis patrol will patrol two points on the horizontal X-axis. To use this functionality try the following: 1.) First set the first point that you would like to patrol from. You can select the name the point by typing in a name.
- Page 35 3.) Then select the amount of time you would like the device to return to home point. Then hit the set button. Go to Point: To go to point simply select the point that you would like to go to and push the goto point button.
-
Page 36: Image
Image The image section allows you to change the Image settings for the device and tune the image of the IP Kamera 9077SPD-I/O Image Settings The Image settings section allows you to change the video settings and the Name of the Kamera. - Page 37 Resolution: Resolution (MPEG4+MPEG4+JPEG): M4:720P,M4:CIF,JPG:352 (MPEG4+JPEG): M4:VGA,JPEG:VGA M4:720P, JPG:720 (MPEG4+JPEG): M4:720,JPEG:352 (MPEG4-1+MPEG4-2) M4:720,M4:CIF Not supported in Firefox: (Single MPEG4): M4:720 Color System: Select the broadcasting color system that pertains to your country. NTSC/60Hz PAL/50Hz Each country has their TV broadcasting standard, please check with your local service provider to find out if you us a NSTC system or PAL system.
-
Page 38: Tune Image
M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium M-JPEG Frame Rate Settings MPEG4-1 30 FPS Bit Rate: Select a value from 64~8000. 15 FPS FPS: Select a FPS from 30fps, 15fps, or 7.5fps 7.5 FPS MPEG4-2 3 FPS... -
Page 39: Network
Network Network The network section allows you to setup the network information for the IP Kamera 9077SPD-I/O. Enable DHCP: This function will enable the DHCP for the device. If this is enabled the IP Address of the device will be automatically provided by the router of the device. -
Page 40: Ftp
File Upload Path: Enter the upload path of the FTP Server SMTP (Outgoing E-mail Server) Enter the SMTP E-mail server information here. The SMTP section allows the 9077SPD-I/OCSWO to send emails out using the SMTP settings. My Server Requires Authentication: Some servers require SMTP Authentication for security purposes. If your email server requires this option, make sure to have this section checked. -
Page 41: Sntp
SMTP Server: Enter the SMTP Outgoing mail address Email Address: Enter the Receiving Email address Submit: After all settings have been made. Hit the submit button to save all changes. Send Test E-Mail: This button will send a test e-mail to the designated account. This way, you can check to make sure that the settings are correct. -
Page 42: Ip Service
Power and Video Server: This is the server where most IP Power products and IP Video server products can be found. Kamera Server: This is the IP server where most IP Kamera products from Aviosys will be found on. CNT Server: Cross Network Technology Sever. CNT allows user to connect to their IP Kamera without having to Port Forward to the device. -
Page 43: Ddns
Once this section has been made you can come here to verify that Note: This function is for IP Surf Pop software. Please refer to the IP Surf Pop manual for more information at www.Aviosys.com Please refer to the IP Surf Pop manual for more information at www.Aviosys.com DDNS The DYNDNS feature allows you to use dyndns with the 9077SPD. -
Page 44: Rtsp
Note: To access the device from outside the network. Please make sure of the following: 9077SPD-I/O should be set to DMZ host, or mapping router's TCP ports 554 and 8554 to 9077SPD-I/O, preferably at the same time mapping UDP port 6970-9999 System The system section allows you to setup the IP 9077SPD-I/O’s system configurations. -
Page 45: Date And Time
Date and Time Set the date and Time of the device here. The Local Time: The local time corresponds to the current time of the IP Kamera 9077SPD-I/O. Time Setup: Setup the current time of the device here 1.) Set Manually: Set the time manually 2.) Synchronize with Computer Time: Synchronize the time with the current computers time... -
Page 46: Night Vision
In this section, you can create different user access rights for different types of users. Authority: Select one of the following options: Admin: You can operate all functions in Web interface. Also, you can add or delete any user’s account. Operator: You can operate all functions in Web interface except user Add/Delete. -
Page 47: Device Tune Up
The language setting section is where you can select the language that you would like to use to use the 9077SPD-I/O. Currently there are 3 languages available: English, Chinese (Traditional), Chinese (Simplified). The 9077SPD-I/O will automatically detect the favored language of choice depending the settings used in Windows. -
Page 48: Update
Update The Update Firmware section is where information on the 9077SPD-I/O is displayed. The Kernel Version, Uboot Version, Firmware Version, and other technical information on the device is displayed here. U pdating the Device 7 2 B Note: The 9077SPD will calculate if you have enough memory to update the device. If not you will be required, turn off all automatic recording functionality and restart the device. - Page 49 Before you go to the next step make sure you have all your setting information written down. The device will reset back to manufacturers default values after you restart the device. You will need reconfigure the IP Kamera 9077SPD-I/O, including Email, FTP, IP Address, Gateway, and etc.
-
Page 50: Event Log
Event Log In the Events Log section you can find the log for the IP Camera. This section will notify you any events that have taken place with the IP Kamera. Application The Application Section setups the Video File information, FTP, SD Card, SMTP - 50- Ref#9077033111... -
Page 51: Setting
Setting Snapshot Path The snapshot path section allows you to configure where you would like your live snapshot and recording files are stored on your local computer. Simply, click on the button and choose a folder to where you want to save the files. PC Split File Size: Allows you to select the segment size of the files that will be recorded onto your computer. - Page 52 The file settings page allows you to configure certain settings for files that are sent to E-mail, FTP, or SD card. File Configuration: Under this section you can select a prefix name for your recorded files. Here you can also add a date stamp to your files by checking the box that says Add Date Stamp File Format Settings: In this section you can select the file that type that you would like to record in.
- Page 53 SD Card The SD card section is where settings to setup the SD card recording is located. In this section you can configure Enable Auto Overwrite: Auto Overwrite allows the device to automatically replace the oldest file on the SD card when it is full.
- Page 54 SD Format: SD format will format the entire SD card Unmount: The feature will unmount the SD card from the device, so it cannot be accessed unless remounted. Reset: To mount the SD card back onto the device, you can use the button Net Drive The net drive function allows you to save your recordings to a local network computer.
- Page 55 4.) Here you can select a user in your windows OS that you would like to share with or Everyone which will share this drive with everyone on your network. Select everyone and hit the add button. Note: The user selected must have Read / Write capabilities for this function to work correctly. 5.) Then hit the share button on the bottom and you should receive a confirmation to show that the folder has been shared.
- Page 56 Setting up Net Drive After the computer has been setup. Now you will need to setup the net drive in the 9077SPD-I/O 1.) For the login and password since we have selected everyone as the sharing user, simply type in any login or password.
- Page 57 2.) Next under Net Drive status click on the Connect button to make sure that the net drive has been setup correctly. When the Net Drive is connected successfully it will say Connect OK In this section you will find a button to disconnect the Net Drive as well as restart the net drive. 3.) Now select the split size to select how big you want the files to be.
- Page 58 E-mail SMTP The SMTP application settings is where the file format uploaded by email can be selected. From here you can choose the files to be in either Jpeg (picture) format or Mpeg. Note: To use the device in Mpeg format make sure to unmount the SD card of the device first. EZ-Blog EZ Blog is a an easy way to integrate your IP camera with your blog or website.
- Page 59 Start by selecting which method you would like to use EZ blog. There are two ways that you can use EZ blog. 1.) Using OCX to broadcast EZ blog Advantages of using OCX: Instant Response Disadvantages: Router needs to be setup in order to use this method. Note: To use EZ blog through OCX you will need to make sure that your device has been properly port forwarded.
- Page 60 2.) Select the dimensions you would like the image to be 3.) Select the create code button to create the embed code 4.) Press the copy button to copy the code that you would like to use. You can highlight the embed code from inside the box and then copying (ctrl + C) or you can just hit the copy button to copy the code.
- Page 61 To use CNT to integrate your IP camera with your blog: 1.) After you have enabled the GAE feature, click on the copy button of EZ Blog by pressing the copy button. 2.) Then paste the code into your blog or website. If user verification is needed you can do the following: 1.) Check in the box that says start verified.
- Page 62 My Web The My-Web functionality will make your IP Kamera more than just a surveillance tool. Now you can use it to promote your company, restaurant, business, school, and etc. With some basic website skills or tools any can make a My Web site. Turning On My Web Enable my web button: The enable My Web button will activate the My Web functionality.
- Page 63 5.) After you have created the webpage, make sure to create a Zip file. Zip up the file and Returning to default My Web page If you would like to return your 9077SPD-I/O to the default My Web page click the default My Web Page button. This will reset the current My Web to the original manufacturer default.
- Page 64 The RSS feature of the 9077SPD will allow the user to be constantly informed about the device. Using RSS any snapshot, motion detection, scheduled recording will notify the user and can also be accessed ***Notice: User need to register in DDNS *** In the Dyndns section, type in the Dyndns that you register from www.dyndns.com and add a /rss20.
-
Page 65: Schedule Record
Schedule Record Schedule The schedule allows you to select days and times that you would like to schedule automatic recording. You can pick a day from (Sunday – Saturday) and also a option for Everyday. To schedule automatic recording: 1.) Select the day that you would want to start recording. 2.) Select the From time and the To time. -
Page 66: Alarm
Schedule Record – Upload Via FTP: Saves schedule recordings into FTP Schedule Record – Save into SD Card: Saves schedule recordings into SD Card Schedule Record – Upload via E-mail SMTP: schedule recordings into e-mail Alarm Motion Detection To enable motion detection: 1.) Select Enable in the motion detection option. - Page 67 When Ethernet connection is lost the device will automatically save into the SD card. Saving a backup. Enable Alarm - Upload When motion is detected, the IP Kamera 9077SPD-I/O will upload files to the selected FTP server. Enable Alarm - Save Into SD Card When motion is detected, the IP Kamera 9077SPD-I/O will upload files to the SD card.
-
Page 68: Media Player
When motion is detected, the IP Kamera 9077SPD-I/O will send files to E-mail. Recording Time: Set the duration of time you would like the IP Kamera 9077SPD-I/O to record when alarm is set off. Enable Alarm Recording Buffer: The alarm recording buffer allows the camera to the selected amount of buffer time before an alarm has been detected. - Page 69 In these file folders you will see that your files are labeled by Year/Month/Day/Time. Also you may see some files that have a pre at the end of the file name. This is from the prerecording technology which allows you to record a specific amount of time before and after motion detection has been activated.
-
Page 70: Logout
To view the IP Kamera in full screen model you will need to press the Full Screen mode. Logout When you are done use the IP Kamera 9077SPD-I/O the logout function allows you to easily logout of your device. This ensures that anyone who uses the device after you will need to re-login to the IP Kamera. -
Page 71: Controlling The Device
This command changes the name of the IP Kamera 9077SPD-I/O http://ipaddress:port/vb.htm?cameratitle=name Ex. http command: h ttp://192.168.1.192/vb.htm?cameratitle=test_9077SPD-I/O11 Change IP Address: This command changes the IP Address of the IP Kamera 9077SPD-I/O http://ipaddress:port/vb.htm?internetip=ipaddress Ex. http command: h ttp://192.168.1.192/vb.htm?internetip=192.168.1.191 Change Port: This command changes the Port of the IP Kamera 9077SPD-I/O http://ipaddress:port/vb.htm?httpport=portnumber... -
Page 72: Change Gateway
Ex. http command h ttp://192.168.1.192/vb.htm?subnetmask=255.255.0.0 Note: Default subnet mask is 255.255.0.0 Change Gateway: This command changes the gateway the IP Kamera 9077SPD-I/O. http://ipaddress:port/vb.htm?gateway=gatewayaddress Ex. http command h ttp://192.168.1.192/vb.htm?gateway=192.168.1.1 Change DNS: This command changes the gateway the IP Kamera 9077SPD-I/O. http://ipaddress:port/vb.htm?dnsip=dnsipaddress Ex. -
Page 73: Move Down
8.) Using RTSP with VLC Before Setting up VLC: Make sure that the 9077SPD-I/Ois set to be the DMZ host on the router that you are using, please refer to the routers manual on how to accomplish this. How to setup VLC media player & Open a network stream Real Time Streaming Protocol (RTSP) gives the device another way to stream live video. - Page 74 Check the Cache value. For low latency, it should be 70~80 based on PC’s performance. Note: If the video is not smooth, set the caching value from 150~1200. This problem could be due to too much congestion, busy pc, and etc. 7.) Save the new settings 8.) Then go back to the VLC media player and go to Media >...
-
Page 75: Additional Software
11.) Hit the play button and wait a few seconds for the program to start streaming. 9.) Additional Software Surf 16CH CNT makes connecting to the IP Kamera 9077SPD-I/O a very simple task. Surf 16 CH a multi-device DVR monitoring software easily allows the user view the 9077SPD-I/O. Follow these simple steps: MAC Address There are two ways to find the MAC address in IP Edit . -
Page 76: Add Device Using Cnt
IP Kamera’s from all over the world as a multi camera monitoring system. With this software you can easily connect to your device using CNT technology from Aviosys. CNT or “Cross Network Technology” allows users who may not be as tech savvy as others to easily view his / her IP Kamera without having to port forward the device through the firewall. -
Page 77: Surf Pop Interface
Surf Pop Interface The Surf Pop Interface is a very easy to use and familiar in format. Very similar to many chat programs like AIM or Skype, Surf Pop allows you to easily manage your IP Kamera’s. - 77- Ref#9077033111... - Page 78 The Surf Pop interface consists four major parts which consists of the following: Camera Display Area: The Camera display section will display information on the current camera that is chosen. Device Search bar: The device search bar is a quick and easy way to find your cameras simply by typing in the device name of the device you are looking for.
-
Page 79: How To Setup Surf Pop
Once the update has been confirmed Surf Pop will automatically update the program itself How to setup Surf Pop Cameras Online The camera online section allows you to see the cameras that you have added from outside the network. Once they have been added to this section every the software is open the devices will stay in this area. Cameras online is basically all the cameras that you added that is outside the network. - Page 80 Removing a device To remove a device from Surf Pop all you need to do is go to the online cameras section and find the device that you would like to remove. Then do the following: 1.) Right click on the camera that you would like to remove and right click. Then select the option that says delete camera.
-
Page 81: Using Surf Pop
3.) Then to see if the device was correctly setup, simply double click on the device in surf pop and a pop window will appear. Using Surf Pop After you have finished setting up the surf pop it is time to use surf pop. Simply just click on click on the devices that you would like to pop out and surf pop will do the rest. - Page 82 Now it would be hard to scroll down the list finding the name of the camera you are looking for so simply use the device search bar and type in the name 9070CSWO and Surf Pop will bring the camera that you are looking for to the top.
- Page 83 Zooming into the image With surf pop you can also easily zoom into the pop windows that you are looking at. Simply just click on the image with the left & right mouse and the device will use the digital zoom feature to zoom in and zoom out. Left Click: Will zoom into the picture Right Click: Will zoom out of the picture Left Double Click: Will zoom to the largest possible zoom...
-
Page 84: Frequently Asked Questions (F.a.q)
Ans: On the back of the device there is a reset button, hold down the reset button for more than 7 seconds. Then give the 9077SPD-I/O a 1 minute to restart. Once the device has restarted it will be set back to manufacturer default settings. -
Page 85: 11.) Customer Feedback
Q6: How do I improve the image quality on this device? Ans: The Image quality of the 9077SPD-I/O is dependent on the bit rate of the device. With a larger bit rate the device will naturally create higher quality image, but this will affect the smoothness of the streaming when accessed through the internet.
Need help?
Do you have a question about the 9077SPD-I and is the answer not in the manual?
Questions and answers