2.4 Camera Shroud installation
Fig.8 illustrates the location of the 4 screw holes for the camera shroud (M3).
Screw holes
Fig.10
2.4.1 Position the open end of the camera shroud towards the camera lens as illustrated on Fig. 9. Align the 4 holes of
the shroud with the 4 holes on the core of the dome as illustrated in Fig. 10.
2.4.2 Utilizing the supplied (4) four M3*14 screws securely tighten the camera shroud in place, as illustrated in Fig. 11.
2.5 Bracket installation
Feed the
wiring harness through the channel inside the wall bracket as illustrated in Fig 12
2.5.1
BNC
the channel remains empty before feeding the wiring harness
Affix the wall bracket to the wall using 4 M6 Expand screws as illustrated in Fig 13
2.5.2
Fig.8
Feed the BNC
Wiring from here
Fig.12
Tighten the screws
.
5
Fig.9
Fig.11
Verify that
.
4-M6 expand screw
Fig.13
.