Honeywell VSD-361P Operation Manual page 18

Vista series vsd tm speed dome
Table of Contents

Advertisement

PreShot Setup
PreShot Name
1. Number
→2. PreShot Setup
3. Call PreShot
4. Delete PreShot
5. Name _________
IRIS CLOSE to Exit
+
IRIS CLOSE When Done
Pan: 262.2 Tilt: 2.7
Call PreShot
PreShot Name
1. Number
2. PreShot Setup
→3. Call PreShot
4. Delete PreShot
5. Name _________
IRIS CLOSE to Exit
Delete PreShot
PreShot Name
1. Number
2. PreShot Setup
3. Call PreShot
→4. Delete PreShot
5. Name _________
IRIS CLOSE to Exit
Are you sure to do this?
IRIS OPEN to Confirm
IRIS CLOSE to Cancel
Setup the preset position on the menu
1. Move the joystick Left/Right or press OPEN to enter Display Options.
2. Move the joystick Left/Right to move the cursor to select the PreShot
1
Options.
3. Move the joystick Left or Right or press OPEN to enter PreShot Options.
4. Move the joystick Left or Right or press OPEN to enter Number Editing.
Note: Edit the Number on the PreShot.
5. Move the joystick Left or Right to move the cursor to edit the digit number.
(0-9)Press OPEN to confirm the selection. Press CLOSE to finalize your
selection and exit.
6. Move the cursor to setup PreShot Position.
7. Move the joystick Left or Right or press OPEN to enter.
8. IRIS CLOSE When Done. When SAVED is displayed on the screen, return
X8
to the menu.
1
Call PreShot on the menu:
1. Move the joystick Left or Right or press OPEN to enter Number Editing
and select the desired PreShot Position.
2. Move the joystick Left or Right to move the cursor to edit the digit number,
Press OPEN to confirm. Press CLOSE to finalize your selection and exit.
3. Move the cursor to select the Call PreShot Position.
4. Move the joystick Left or Right or press OPEN to call the PreShot Position.
5. Press CLOSE to exit.
1
Delete Preset Position on the menu:
1. Edit the number to be deleted (Refer to Number Input Instruction)
Note: Select the PreShot to be deleted.
2. Move the cursor to select the Deleted Position.
4. Move the joystick Left or Right to enter the deleting position.
5. Press OPEN when done. Press CLOSE to exit.
+
Stored
Pan: 262.2 Tilt: 2.7
14
X8

Advertisement

Table of Contents
loading

Table of Contents