Connecting Other Equipment - JVC MX-J300 Service Manual

Connecting Other Equipment

You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
FM
75
AM
EXT
AUX
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
To audio output
Connect the audio output jacks on the other equipment and
the AUX IN jacks on the rear, using an audio cord (not
supplied).
ANTENNA
FM
GND
GND
AM LOOP
IN
RIGHT LEFT
SPEAKERS
RIGHT LEFT
Audio equipment
NOW, you can plug in the unit and other
connected equipment FINALLY!
ANTENNA
FM
FM
75 GND
AM
EXT
GND
AM LOOP
AUX
IN
RIGHT LEFT
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
SPEAKERS
RIGHT LEFT
When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
To stop the display demonstration, press any button on the
unit or the remote control.
To start the display demonstration manually
Press and hold DEMO for more than 2
seconds.
To stop the demonstration, press any button.
– 10 –
To a wall outlet
DEMO
CANCEL