Removing Av Module And Connector Board - Acer PD721 Service Manual

Removing AV Module and Connector Board

1. Turn over Bottom Housing and remove four screws from Bottom Housing.
2. Unscrew two screws of Label Connector Module to remove Label Connector Module
and remove two screws from Connector Cover Clamp. Take off Side Vent.
3. Remove two screws and four long screws from Label Connector Module.
4. Unscrew four screws of Connector Board to remove it.
Label Connector
Module
Chapter 3
Connector Board
Connector Cover Clamp
Bottom Housing
Side Vent
Connector Board
20