How To Set The Copy Default Setting Mode - Kyocera Mita KM-2030 Instruction Handbook Manual

CHAPTER 6 COPIER MANAGEMENT

(2) How to set the copy default setting mode

1 Press the /Language key to light the indicator.
*
The management mode selection screen will appear.
2 Press the cursor down key to select "COPY DEFAULT".
3 Press the enter key.
4
Enter the management code "2000" with the numeric keys.
NOTE
• The 4-digit management code can be changed. (See "@ MANAGE-
MENT CODE CHANGE" on page 6-18.)
5
Press the cursor down or up key to select the copy default
setting to be changed. See "(1) Copy default settings" on
page 6-9 for settings that can be changed.
6-11
6
Press the enter key.
7 Make settings as explained below.
NOTE
• (>) displayed in each setting screen indicates the present setting
value.
• After finishing each setting, the display will return to the screen in
step 5. If changing other settings, repeat step 5 to 7.
8
Press the cursor up key to select "END" and press the enter
key to finish settings. The message display will return to the
"READY TO COPY." screen.
1 EXPOSURE MODE
1 Press the cursor down or up key to select "AUTO", "MIXED",
"PHOTO" or "TEXT".
2 Press the enter key.
2 EXPOSURE STEPS
1 Press the cursor down or up key to select "5 STEPS" or
"9 STEPS".
2 Press the enter key.