Replacing The Toner Cartridge And Waste Toner Tank - Kyocera Mita KM-2030 Instruction Handbook Manual

CHAPTER 3 HOW TO LOAD PAPER

2. Replacing the toner cartridge and waste toner tank

If "ADD TONER TO RESUME COPYING" appears on the message
display, replenish the toner. Although several copies can be made
after the message appears, it is recommended to replace the toner
cartridge immediately. After replacing the toner cartridge, be sure to
also replace the waste toner tank.
* Replenish toner only when the message is displayed.
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burns.
1
Open the front cover.
2
Turn the toner cartridge release lever to the right as far as it
will go. The old cartridge will be unlocked.
3-5
3
Pull the old toner cartridge out toward you.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
4
Tap the new toner cartridge on the top 5 or 6 times and
shake it from side to side 8 to 10 times.
5
Fit the new toner cartridge into the copier.
* Align the arrow on the top of the toner cartridge with the
cutout in the copier and then insert the cartridge into the
copier.