Making Copies When The Copier Is In The Copy Management Mode - Kyocera Mita KM-2030 Instruction Handbook Manual

Turning copy management ON/OFF
1 Display the copy management selection screen. (See page
6-3.)
NOTE
• Copy management ON or OFF appears in the upper right-hand of
the screen.
See the following procedures to turn copy management ON/OFF.
2
Press the cursor down key to select "COPY MANAGEMENT
ON/OFF".
3
Press the enter key.
4
Press the cursor down or up key to select "ON" or "OFF".
5 Press the enter key.
The display will return to the screen in step 2.
6 Make sure that "END" has been selected and press the enter
key. When "OFF" is selected, the message display will return
to the "READY TO COPY." screen.
CHAPTER 6 COPIER MANAGEMENT
(4) Making copies when the copier is in the copy
management mode
When the copier is in the copy management mode, "ENTER 4-DIGIT
CODE WITH #-KEYS" will appear on the message display.
1
Enter the ID-code for your department with the numeric keys.
2
If "READY TO COPY." appears, carry out copying in the
usual manner.
NOTE
• When copying is finished, press the Energy Saver (preheat) key. If
the auto clear function works, the copier will return to the previous
state.
6-8