Starting Up And Regulating The Temperature - AEG SANTO Operating Instructions Manual

Starting Up and Regulating the Temperature

Fridge and freezer sections can each be regulated independently of the
other. The control panel is situated behind the fridge door at the top of
the fridge section.
0
1. Insert plug into mains socket. Within 20 seconds the electronics carry
out a system test and switch the appliance on. The ON/OFF button
lights up in green, the interior lighting comes on and the appliance
starts working. If the temperature warning signal sounds, this can be
switched off by pressing the ALARM OFF button.
3
Starting up when the appliance is switched off:
Press and hold down the ON/OFF button for three seconds. The ON/OFF
button lights up in green, the interior lighting comes on and the
appliance starts working. If the temperature warning signal sounds, it
can be switched off by pressing the ALARM OFF button.
Setting the Fridge Temperature
0
1. Open the fridge door.
A coin is required to turn the temperature regulator. This makes it more
difficult to change the temperature setting accidentally (child safety).
H
Setting "
Setting "2" = warmest interior temperature
Setting "5" = coldest interior temperature
2. Using a coin, set the temperature required for the fridge by turning the
temperature regulator. Select a middle position for normal operation.
The interior temperature is affected by the ambient temperature, the
amount of food in the fridge, and how frequently and for how long the
door is opened.
3. Close the fridge door
3
As the storage temperature within the fridge is reached quickly you can
store food immediately after switching on.
Setting the Freezer Temperature
0
1. Open the fridge door.
A coin is required to turn the temperature regulator. This makes it more
difficult to change the temperature setting accidentally (child safety).
Setting "1" = warmest interior temperature
Setting "5" = coldest interior temperature
" = holiday switch
51