AEG SANTO Operating Instructions Manual page 14

Reversing The Door
After changing the door hinges, check that the magnetic seals on the
doors fit perfectly against the housing and that the interior lighting
goes off when the door is closed.
10. Depending on the model:
Model with bar handle
Unscrew the top handle bracket
from the handle rod (1). Unscrew
the bottom handle bracket from
the door (2).
Unscrew the top handle bracket
from the door (3) and screw onto
the bottom right-hand side of the
door (4).
1
Caution! Do not overtighten the
screws (max. 2 Nm) as you may
damage the door handles.
Turn the handle bracket with the
handle rod 180° and screw them
to the door (5) and the fitted
handle bracket (6).
1
Caution! Do not overtighten the
screws (max. 2 Nm) as you may
damage the door handles.
48