Starting Up And Temperature Regulation - AEG SANTO U86040-1i Operating Instructions Manual

Table of Contents

Advertisement

Starting up and temperature regulation

Important! Only use the appliance
when built–in!
The temperature regulator is in the
refrigerator compartment on the
upper right. It is also the ON/OFF-
switch.
Position „0" = Refrigeration off
Position „1" = Warmest interior temperature
Position „6" = Coldest interior temperature
1. Plug the mains plug into the mains socket.
2. Set the required temperature by turning the temperature regulator.
The inside light goes on. The compressor starts and then runs automa-
tically.
Note: When the setting is changed, the compressor does not start
immediately if automatic defrosting is currently taking place.
Goods to be refrigerated can be loaded immediately after switching
on, because the storage temperature in the refrigerator is quickly
reached.
Important! Wait until the freezer compartment has reached a temper-
ature of –18°C, before storing frozen food.
Note: From a food science point of view, +5°C for the refrigerator
compartment and -18°C for the freezer compartment should be con-
sidered cold enough as a storage temperature.
The following effects are of significance in respect of the interior tem-
perature:
– Ambient temperature;
– Quantity and temperature of the food stored;
– Frequency with which the door is opened and how long it is left
open.
– A defect in the appliance.
The temperature regulator setting may therefore need to be adjusted
to suit the specific conditions.
48
AEG62

Advertisement

Table of Contents
loading

Table of Contents