Table of Contents
Advertisement
Using your oven
20
US
CA
410 F
Select a function
1
Rotate the function dial to select a function
The function indicator light will come on.
The preset function temperature will flash
in the display. (Each cooking function has a
preset temperature).
If you wish to use the oven at the preset
temperature -
Press the
turn on and heat up. The display will revert
to show the actual oven temperature.
the
indicator will show in the display.
Note: if you select
show dEFand the oven will turn on. The
temperature cannot be adjusted when
using this function.
If the display is steadily lit and you wish to
change the temperature either:
Rotate the temperature dial; or
1
Press the
button and use the
2
and
buttons to increase or decrease
temperature.
Tmperature
indicator light
Function and temperature dials
FUNCTION
button and the oven will
, the display will
Function
indicator light
430F
Adjust the temperature
2a
There are two ways to set the
temperature while the display is
flashing:
Rotate the temperature dial (clockwise
to increase and anticlockwise to
decrease the temperature);
OR
Use the
and
or decrease the set temperature.
Press the
button. After a few
seconds, the display will stop flashing
and the oven will turn on and heat
up. The display will revert to show the
actual oven temperature.
The
indicator will show in the
display.
Note: The temperature indicator light
will come on.
TEMPERATURE
buttons to increase
Advertisement
Table of Contents
