Iwatsu Icon IX-5900 Quick Reference Manual page 12

Exclusive Hold On Outside Line
A call on "exclusive" hold may only be picked up
from your extension.
While speaking on an outside call:
• Press the key for the outside line you are already
using.
• The green lamp on that outside line key will
flash slowly on your phone.
• The red lamp will stay lit at other extensions.
To retrieve a call on Exclusive Hold:
• Press the same outside line key on your phone
again to be connected to the call.
Flash
Flash allows you to receive dial tone on the same
outside line that you are using without having to
hang up. Flash may also be used to receive inter-
com dial tone to place another intercom call.
After you complete a call or if you make a dial-
ing mistake:
• Press [FLASH].
• Dial the new number.
To Use Centrex or PBX features:
• Press [S FLASH].
• Dial the new number or feature code.
If your phone does not have [FLASH] or [S
FLASH] keys:
• Press FEATURE then dial 1+1 for Flash.
• Press FEATURE then dial 1+2 for Short Flash.
Flexible Call Forwarding
You can set your phone to forward calls to another
extension or to an external telephone number. To
forward calls externally, you must first register the
external telephone number to a personal speed dial
code (90-99). (See the Speed Dial feature)
You can also separate Call Forward destinations for
ICM calls and CO incoming calls. For example, you
could forward all ICM calls to external number or a
number programmed in you Personal Speed Dial
Bin and all CO calls to another extension.
Set Forward Destination:
• Lift the receiver (handset) or press SPEAKER.
• Press [FWD].
• Enter the Call Type you wish to forward:
1 = All calls (CO/Intercom).
2 = CO calls only.
3 = Intercom calls only.
• Enter the Flexible Call Forward Mode:
1 = All calls to another extension or hunt group.
2 = Busy/No Answer calls to another extension or
hunt group.
3 = No Answer calls to another extension or hunt
group.
4 = All Calls forward to an external number (using
Personal Speed Dial Codes 90-99).
11