Chauvet Followspot 1200 User Manual page 20

Operation
Offset Mode (Cont.)
Dimmer Offset
Exiting Offset Mode
Followspot 1200 User Manual Rev. 03e
Performs the fine position adjustment for the dimmer
1) Press <UP> or <DOWN> repeatedly until the display shows
2) Press <ENTER>.
The display will start blinking, showing the current value (-127~127).
3) Press <UP> or <DOWN> to set the new value.
4) Press <ENTER> to save the new value or <MENU> to exit without saving.
1) After you are done, wait eight seconds for the display timer to activate.
The display will show the current DMX address.
-16- April 7, 2010