6: Adjusting The Speaker Levels And Balance (Test Tone) - Sony STR-DG520 Operating Instructions Manual

Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
MASTER
VOL +/-
Input
buttons
1
2·5
1
Press AMP MENU.
"I-LEVEL" appears on the display.
2
Press
CD
or
+
to enter the
menu.
3
Press .,. repeatedly to select
"T. TONE".
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
6: Adjusting the speaker
levels and balance
(TEST TONE)
Tip
Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the remote buttons
may be reset to their factory settings. If this
happens, reassign the buttons again (page 54).
Insert two R6 (size-AA) batteries in the
RM-AAU020 Remote Commander.
Observe the correct polarity when installing
batteries.
4
Press
CD
or
+
to enter the
parameter.
26 US