Sony STR-DG520 Operating Instructions Manual page 19

The image from a video component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Before connecting cords, make sure to
disconnect the AC power cord (mains lead).
TV
Audio signals
Note
Be sure to tum on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
Tips
• You can watch the selected input image when you
connect the MONITOR OUT or HDMI OUT jack
to a TV or projector.
• To output the sound of the TV from the speakers
connected to the receiver, be sure to:
- connect the audio output jacks of the TV to the
TV AUDIO IN jacks of the receiver.
- turn off TV's volume or activate the TV's muting
function.
Video signals
-
"Audio cord (not supplied)
0Video cord (not supplied)
e
Component video cord (not supplied)
19
U5