Sony STR-DG520 Operating Instructions Manual page 48

1
Press TUNER repeatedly to
select the FM or AM band.
2
Press PRESET + or PRESET -
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
2
ENTER
~1-1
Numeric
buttons
3
Press MEMORY.
You can also use MEMORYIENTER on
the receiver.
"MEMORY" lights up for a few seconds.
Perform steps 4 and 5 before
"MEMORY" goes out.
4
Press the numeric buttons to
select a preset number.
You can also press PRESET
+
or
PRESET - repeatedly to select a preset
number.
If "MEMORY" goes out before you
select the preset number, start again from
step 3.
5
Press ENTER.
You can also use MEMORYIENTER on
the receiver.
The station is stored as the selected preset
number.
If "MEMORY" goes out before you press
ENTER, start again from step 3.
6
Repeat steps 1 to 5 to preset
another station.
r O l - 0 2 - 0 3 - 0 4 _ 0 5 -...
-27~
L .... ,
30-29-28 ....
--.J
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
Using the controls on the
receiver
1
Turn INPUT SELECTOR to select the FM
or AM band.
2
Press TUNING MODE repeatedly to select
"PRESET T.".
3
Press TUNING
+
or TUNING - repeatedly
to select the preset station you want.
48
US