IPSO T30 Planning Manual page 12

Tumblers – T30 and T45
To reduce the risk of severe injury, clearance of tumble dryer cabinet from combustible
construction must conform to the minimum clearances.
NOTE: Shaded areas indicate adjacent structure.
1 0.5 in. (13 mm) recommended between machines for removal or installation.
2 Allow 2 – 4 in. (51 – 102 mm) opening at top of machine to aid in removal or installation. A removable trim piece
may be used to conceal the opening; zero clearance allowed for trim.
3 4 in. (102 mm) Maximum Header Thickness
4 12 in. (305 mm) Minimum Clearance
5 24 in. (610 mm) Minimum, 36 in. (914 mm) recommended for maintenance purposes.
6 Provision for Make-Up Air: Minimum 1.5 square feet T30 models, minimum 2 square feet T45 models. Location
for reference only. May be anywhere behind tumbler.
7 0.25 in. (6 mm) recommended for removal or installation purposes, zero clearance allowed.
11
1
7
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
WARNING
3
2
Figure 1
W056R1
4
5
6
TMB2110N
TMB2110N
4-08-43