Rear Panel Parts Descriptions; Remote Parts Descriptions - Sony SCD-C555ES Service Manual

Rear Panel Parts Descriptions

L
R
FRONT
2CH OUT
ANALOG
1 ANALOG 2CH OUT L/R jacks (6)
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
2 ANALOG 5.1CH OUT jacks (5)
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
3 DIGITAL (CD) OUT OPTICAL connector (7)
Connect to an audio component using an optical
digital cable.

Remote Parts Descriptions

1 CONTINUE button (14)
Press to resume normal play from Shuffle Play or
Program Play.
SHUFFLE button (22)
Press to select Shuffle Play.
PROGRAM button (23)
Press to select Program Play.
2 NAME INPUT button (29)
Press to enter the name input mode.
3 DISC/CAPS button (19, 29)
Press to select the disc.
Press to select the capital letter in name input mode.
4 Number buttons (19)
Press to enter the track numbers.
5 i 10 button (19)
Press to locate a track numbered over 10.
6 REPEAT button (21)
Press repeatedly to play all tracks or only one track on
the disc.
7 CHECK button (23)
Press to check the programmed order.
8 H button (14)
Press to start play.
X button (14)
Press to pause play.
x button (14)
Press to stop play.
9 AMS ./> (AMS: Automatic Music Sensor)
buttons (19)
Press to locate a specific track.
L
CENTER
R SUB
SURR WOOFER OPTICAL COAXIAL
5.1CH OUT OUT
CONTROL
DIGITAL (CD) A1ΙΙ
0 m/M buttons (20)
Press to locate a portion you want to play within a
track.
qa DISC SKIP +/– buttons (14)
Press to select the disc.
qs CD1/2 (COMMAND MODE) switch (7)
Select the command mode.
qd DISPLAY MODE button (16)
Press to turn off the information.
qf SACD/CD button (14)
Each time you press the button while the Hybrid disc
(page 13) is loaded, the layer changes between an HD
layer (the SACD/CD LED turns on) and CD layer (the
SACD/CD LED turns off).
qg MULTI/2CH button (14)
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded. When you
select the Multi-channel playback area (page 13), the
MULTI/2CH LED turns on.
qh TIME/TEXT/SPACE button (16, 30)
Each time you press the button, the playing time of
the track, the total remaining time on the disc, or
TEXT information appears in the display.
Press to insert a space in name input mode.
qj ENTER button (29)
Press to decide the selection.
qk CLEAR button (23)
Press to delete a programmed track number.
ql LEVEL ADJ button (26)
Press to adjust the output level balance for the Multi-
channel management function (page 24).
4 DIGITAL (CD) OUT COAXIAL connector (7)
Connect to an audio component using the coaxial
digital cable.
5 CONTROL A1 jacks (7, 31)
Connect to a Sony audio component using the
monaural (2P) mini-plug cord.
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 3 and 4. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT.
SCD-C555ES
CD1 CD2
PLAY MODE
CONTINUE SHUFFLE PROGRAM
NAME DISPLAY
SACD/CD
INPUT MODE
DISC TIME/TEXT
MULTI/2CH
CAPS SPACE
&!? ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
>10 ENTER
10/0
REPEAT CHECK CLEAR
LEVEL
ADJ
AMS
DISC SKIP
– +
5