Battery Removal And Installation - Cushman LSV 800 Owner's Manual

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
Do not overfill batteries. The charging cycle will expel electrolyte and result in component damage.
• The electrolyte level in all cells must be at the recommended level and cover the plates.
• The charging must take place in an area that is well ventilated.
• The charging connector components must be in good condition and free from dirt or debris.
• The power cord plug must be fully inserted into the vehicle charger receptacle.
• The power cord is protected from damage and is located in an area to prevent injury that may result from running
over or tripping over the cord.

Battery Removal and Installation

Improper handling of high voltage wiring, batteries, or control systems could result in serious or
fatal injury by electric shock. Only qualified technicians should repair or access high voltage wir-
ing, battery packs, and associated systems.
To prevent battery explosion that could result in severe personal injury or death, extreme care
must be used with aerosol containers of battery terminal protectant. Insulate the metal container
to prevent the metal can from contacting battery terminals, which could result in an explosion.
If the batteries are replaced, make sure they are the exact type and model originally supplied with the vehicle. Fail-
ure to follow this caution can result in damage to the vehicle's electrical system.
Red Wire
from
Controller
Red Wire from
Accessory Harness
Battery Connections
MAINTENANCE
Black Wire
from Controller
Black Wire
from Accessory
Harness
5
5 - 17