Table of Contents
Advertisement
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
LIGHT BULB REPLACEMENT
To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or
paper towel to handle the glass portion of the bulb.
Headlight Bulb Replacement
Make sure that the vehicle key switch is in the OFF position and the
key has been removed. For vehicles equipped with lights mounted
in the cowl, locate the headlight bulb socket on the backside of the
light assembly.
1. Disconnect the accessory harness (5) from the light bulb.
2. Turn the headlight bulb (3) clockwise and pull to remove.
3. Align the bulb with the opening in the back of the headlight as-
sembly.
4. Turn the bulb (3) counterclockwise until it stops.
5. Connect the accessory harness (5) to the light bulb (3).
Turn Signal Bulb Replacement
Make sure that the vehicle key switch is in the
OFF position and the key has been removed.
1. Remove the two Phillips head screws (7) that
secure the lens (8) to the fascia (9).
2. Remove the light bulb.
3. Install the new light bulb.
4. Install the lens (8) and secure in place with the
two Phillips head screws (7).
Taillight/Brake Light Bulb Replacement
Make sure that the vehicle key switch is in the OFF position and
the key has been removed.
1. Remove the two Phillips head screws (10) that secure the lens
(11) to the taillight assembly.
2. Remove the light bulb.
3. Install the new light bulb.
4. Install the lens (11) and secure in place with the two Phillips
head screws (10).
MAINTENANCE
7
8
9
5
3
5
10
11
5 - 7
Hide quick links:
Advertisement
Chapters
Table of Contents
