Table of Contents
Advertisement
<[,,-')6>
VM9512HD
MP3/WMA OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD and MP3 operation. Please see the DVD/Disc Video
Operation section for information about these topics.
NOTE: When burning MP3 I WMA flies onto a DVD
dIsc, use the 2X or 4X burning option, if available.
ThIs slower burning speed will help eliminate
buffer errors and increase disc reading reliability.
Also, use folders when burning large numbers of
songs I files to
a
disc for easy music naVigation.
Select the "Disc at Once" option and close your
disc.
MP3/WMA Media and File
Requirements
This player allows you to play back MP3 and VVMA files
recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs.
For CD-RW discs, please make sure it is formatted using the
full method and not the quick method to prevent illegal disc
operation.
Up to 1500 songs/files can be burned onto a disc for a MEGA
DVD music mix. Do not exceed this number of songs/files or
disc readability problems may occur.
MP3 Format Compatibility
The file naming formats listed below are compatible with this
unit:
ISO 9660 - file name: 12 characters, file extension: 3
characters
ISO 9660 - file name: 31 characters, file extension: 3
characters
Joliet - 64 characters
If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly. Use the following settings when compressing audio
data for your MP3 disc:
Transfer Bit Rate: 128kbps
Sampling Frequency: 48kHz
NOTE: When recording MP3 up to the maximum
disc capacity, disable additional Writing. For
recording on an empty disc up to maximum disc
capacIty, use the "Disc at once" setting.
MP3 Playing Order
When selected for play, files and folders (Folder Search, File
Search or Folder Select) are accessed in the order they were
written by the CD writer. As a result, the order in which they
are expected to be played may not match the order in which
they are actually played. You may be able to set the order in
which MP3IVVMA files are to be played by writing them onto a
medium such as a CD-R with their file names beginning with
play sequence numbers such as "01" to "99".
For example, a medium with the following folder/file hierarchy
is SUbject to Folder Search, File Search or Folder Select, as
shown below.
o
(OJ)
2
3
Jl(j)
Jl(j)
Jl@
Jl@
Jl®
Jl@
5
JlCi!
Jl~)
D
Folder
Jl
(g)
J>
File
Jl@
@
Root
level 1
level 3
level 2
level 4
The VM9512HD player will only recognize three folder levels
and does not display folders containing only other folders. In
the example above, the unit will display folders 3, 4, 6, and 8,
but not 2 and 7 since they do not contain any tracks directly.
Folder 5 is not recognized at all since it is at the fourth level.
28
Loading an SD Card
Insert the SO card into the SO slot (21) on the front of the
radio. The unit will read the audio media files on the card
automatically.
To remove the card, first press the SRC button (6) to switch to
another mode and stop SO playback. Pull the SO card out to
remove
it.
Loading a USB Device
1.
Locate the USB jack located on the MediaLink
4
Type
A USB Connector
2.
Insert the USB device into the USB connector. The unit
will read the audio media files on the USB device
automatically.
To remove the USB device, press the SRC button (6) to
switch to another mode and then remove the USB device
from the USB connector.
Advertisement
Table of Contents
