Specifications; Setup; Operation - Chicago Electric 95020 Owner's Manual

Specifications

Electrical Rating
No Load Speed
Dust Opening
Backing Pad Dimensions 4" W x 4
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the power Switch of the tool off and unplug the tool from its electrical
outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 11.
Assembly
1. To attach the Dust Bag (12) to the
Palm Sander, place the opening of the
Dust Bag (12) on top of the opening of
the Dust Port of the Palm Sander and
press down. Snap it in place into the
rectangular shaft at the back of the Sander.
Functions
power
Switch
Page 8
120VAC, 60Hz, 2A
13,000 OPM
3
1 / " OD
8
1
/ " L
2
For technical questions, please call 1-888-866-5797.
2. The Dust Collection Chute will only work
if the sandpaper has holes that line up
with the 6 dust collection holes in the
Backing Pad (22). (There are 4 other holes
in the Backing Pad for the Screws).
clamp
Sanding pad
93MA
E194601
power
cord
Dust Bag
Item 95020